1.Applies to the PLC + touch screen control, easy to operate.
2.Enclosed design ensures highest leavel of safety.
3.Adjust the position of the suction nozzle to ensure the clamping of PCB.
4.Smooth and parallel width adjustment (lead screw)
5.Smooth and accurate translation (stepping motor)
6.Minimize the transmission gap between conveyors.
7.With SMEMA signal.
Description
This equipment is used for PCB bare board material operation on the production line.
Specification
Model | VL-330W-TN | VL-460W-TN |
Dimension(L*W*H) | 600*1002*1300mm | 50*50-445*330mm |
PCB size(L*W) | 800*1270*1300mm | 50*50-530*460mm |
Maximum PCBs capacity | 400pcs(0.4mm thick PCB) | |
Quantity of rail | Single rail | |
Belt type | 4mm flat belt | |
Load bearing | 2kg/PCB | |
Transport height | 900±20mm(or custimzie) | |
Cycle time | 12 Seconds or specity | |
Power supply | AC 110/220V±10V, 50/60HZ | |
Power | Max 150VA | |
Air prssure | 4-6bar | |
Air consumption | 10itr/min max | |
Screen size | 7 inch | |
PCB thickness | Minimum 0.4mm thickness | |
Number of nozzals | 4pcs(stp) | |
Transport direction | L-R or R-L | |
CE | Yes | |
PLC | Yes | |
SMEMA | Yes | |
Weight | 130kg | 150kg |